WIND DIRECTIONAL CAP VIEW SPEC SHEET | ![]() | ||||
---|---|---|---|---|---|
The Artis wind directional cap is used to control downdraft issues caused by high wind situations and will pivot depending on wind direction to protect from both rain and downdraft. | |||||
GALVANIZED | STAINLESS STEEL | ||||
SIZE: | ITEM # | WT. | SIZE: | ITEM # | WT. |
5″ | WDC 5 | 4.00 | 5″ | WDCS 5 | 4.00 |
6″ | WDC 6 | 4.00 | 6″ | WDCS 6 | 4.00 |
7″ | WDC 7 | 6.00 | 7″ | WDCS 7 | 6.00 |
8″ | WDC 8 | 7.00 | 8″ | WDCS 8 | 7.00 |
10″ | WDC 10 | 8.00 | 10″ | WDCS 10 | 8.00 |
12″ | WDC 12 | 10.00 | 12″ | WDCS 12 | 10.00 |
WIND DIRECTIONAL CAP ADAPTOR VIEW SPEC SHEET | ![]() | ||||
---|---|---|---|---|---|
The Artis chimney cap adaptor slides down the inside of triple wall or insulated pipe leaving a 2” collar to attach any Artis chimney cap to the pipe. Storm collar included and attached. | |||||
GALVANIZED | STAINLESS STEEL | ||||
SIZE: | ITEM # | WT. | SIZE: | ITEM # | WT. |
5″ | GWCA 5 | 2.00 | 5″ | SWCA 5 | 2.00 |
6″ | GWCA 6 | 2.00 | 6″ | SWCA 6 | 2.00 |
7″ | GWCA 7 | 2.00 | 7″ | SWCA 7 | 2.00 |
8″ | GWCA 8 | 3.00 | 8″ | SWCA 8 | 3.00 |
10″ | GWCA 10 | 3.00 | 10″ | SWCA 10 | 3.00 |
12″ | GWCA 12 | 4.00 | 12″ | SWCA 12 | 4.00 |
Adaptor is needed to attach Artis caps to double and triple wall pipe |
CONE TOP CAP VIEW SPEC SHEET | ![]() | ||||
---|---|---|---|---|---|
The Artis cone top cap is for use as an all-weather cap to keep rain & snow from leaking into chimney & ventilation pipe on residential and commercial structures. | |||||
GALVANIZED | STAINLESS STEEL | ||||
SIZE: | ITEM # | WT. | SIZE: | ITEM # | WT. |
3″ | GCT 3 | 0.45 | 3″ | SCT 3 | 0.45 |
4″ | GCT 4 | 0.50 | 4″ | SCT 4 | 0.50 |
5″ | GCT 5 | 0.75 | 5″ | SCT 5 | 0.75 |
6″ | GCT 6 | 1.00 | 6″ | SCT 6 | 1.00 |
7″ | GCT 7 | 1.00 | 7″ | SCT 7 | 1.15 |
8″ | GCT 8 | 1.25 | 8″ | SCT 8 | 1.25 |
9″ | GCT 9 | 1.25 | 9″ | SCT 9 | 1.50 |
10″ | GCT 10 | 1.75 | 10″ | SCT 10 | 1.75 |
12″ | GCT 12 | 2.50* | 12″ | SCT 12 | 2.90* |
14″ | GCT 14 | 3.00* | 14″ | SCT 14 | 3.15* |
16″ | GCT 16 | 3.50* | 16″ | SCT 16 | 4.00* |
18″ | GCT 18 | 5.00* | 18″ | SCT 18 | 7.88* |
20″ | GCT 20 | 4.75 | |||
24″ | GCT 24 | 7.00* | |||
( * ) INDICATES OVERSIZE CARTON – for ground of truck shipping method | |||||
Some larger sizes are available – Call us for pricing | |||||
1/8″ or 1/4″ screen is available at extra charge |
COPPER CONE TOP CAP VIEW SPEC SHEET | ![]() | |
---|---|---|
The Cone Top Cap is for use as an all-weather cap as well as for ventilation keeps rain and snow from leaking into chimney pipe all with the aesthetically pleasing look of copper | ||
COPPER | ||
SIZE: | ITEM # | WT. |
4″ | CCT 4 | 2.50 |
6″ | CCT 6 | 3.00 |
8″ | CCT 8 | 3.25 |
9″ | CCT 9 | 3.50 |
10″ | CCT 10 | 4.00 |
12″ | CCT 12 | 4.75 |
14″ | CCT 14 | 5.50 |
ADJUSTABLE CONE CAP (ADJUSTS TO FIT LISTED SIZES) CONTACT US to request product specs | ![]() | ||
---|---|---|---|
The Artis Adjustable Cone Cap is for use as an all-weather cap to keep rain and snow from leaking into chimney pipe as well as for ventilation. | |||
GALVANIZED ONLY | |||
SIZE: | ITEM # | WT. | |
4″ & 5″ | GCT 45 | 1.00 | |
6″, 7″ & 8″ | GCT 68 | 1.50 | |
9″, 10″ & 12″ | GCT 912 | 2.75 | |
Draw bolt included. |
ARTIS VACUUM CAP VIEW SPEC SHEET | ![]() | |||||||
---|---|---|---|---|---|---|---|---|
The Artis vacuum cap is Artis Metals company’s flagship vent cap for use with fossil fuel chimneys – it was designed to prevent downdraft and poor draws created by wind when the wind blows across the side gores, the cap creates a vacuum at the base pulling air and/or fumes from the pipe and out the cap. | ||||||||
GALVANIZED | STAINLESS STEEL | ALUMINUM | ||||||
SIZE: | ITEM # | WT. | SIZE: | ITEM # | WT. | SIZE: | ITEM # | WT. EA. |
3″ | GVC 326 | 0.50 | 3″ | SVC 326 | 0.50 | 3″ | AVC 320 | 0.20 |
4″ | GVC 426 | 0.75 | 4″ | SVC 426 | 0.75 | 4″ | AVC 420 | 0.50 |
5″ | GVC 526 | 1.00 | 5″ | SVC 526 | 1.00 | 5″ | AVC 525 | 0.50 |
6″ | GVC 626 | 1.50 | 6″ | SVC 626 | 1.75 | 6″ | AVC 625 | 0.75 |
7″ | GVC 726 | 2.25 | 7″ | SVC 726 | 2.00 | 7″ | AVC 725 | 0.75 |
8″ | GVC 824 | 3.00 | 8″ | SVC 824 | 3.00 | 8″ | AVC 825 | 1.00 |
9″ | GVC 924 | 3.50 | 9″ | SVC 924 | 3.50 | 9″ | AVC 925 | 1.50 |
10″ | GVC 1024 | 4.50 | 10″ | SVC 1024 | 5.00 | 10″ | AVC 1025 | 1.75 |
12″ | GVC 1224 | 5.50 | 12″ | SVC 1224 | 6.00 | 12″ | AVC 1225 | 2.00 |
14″ | GVC 1424 | 8.00* | 14″ | SVC 1426 | 6.00* | 14″ | AVC 1425 | 2.50* |
16″ | GVC 1624 | 10.00* | 16″ | SVC 1626 | 8.00* | 16″ | AVC 1625 | 3.50* |
18′ | GVC 1824 | 11.50* | 18″ | SVC 1826 | 8.00* | 18″ | AVC 1825 | 4.25* |
20″ | GVC 2024 | 15.00* | 20″ | SVC 2026 | 10.00* | 20″ | AVC 2025 | 5.00* |
( * ) INDICATES OVERSIZE CARTON – for ground of truck shipping method | ||||||||
½ sizes are available and priced to next largest full size |
ARTIS VACUUM TILE CAP CONTACT US to request product specs | ![]() | ||||
---|---|---|---|---|---|
The artis vacuum tile cap is the vacuum cap for use specifically with tile chimney liners it was designed to prevent downdraft and poor draws created by wind. When the wind blows across the side gores, the cap creates a vacuum at the base pulling air and/or fumes from the pipe and out the cap | |||||
GALVANIZED | STAINLESS STEEL | ||||
SIZE: | ITEM # | WT. | SIZE: | ITEM # | WT. |
8X8 | GSQ 824 | 4.00 | 8X8 | SSQ 824 | 3.50 |
8X10 | GSQ 81024 | 4.50 | 8X10 | SSQ 81024 | 4.00 |
8X12 | GSQ 81224 | 5.50 | 8X12 | SSQ 81224 | 4.75 |
8X16 | GSQ 81624 | 7.50* | 8X16 | SSQ 81624 | 6.50* |
12X12 | GSQ 121224 | 7.50* | 12X12 | SSQ 121224 | 6.75* |
12X16 | GSQ 121624 | 9.00* | 12X16 | SSQ 121624 | 7.75* |
16X16 | GSQ 161624 | 12.00* | 16X16 | SSQ 161624 | 10.25* |
( * ) INDICATES OVERSIZE CARTON – for ground of truck shipping method | |||||
Add $30.00 to list price for custom fit (give length and width) |
ADJUSTABLE TILE ADAPTOR CONTACT US to request product specs | ![]() | ||||||
---|---|---|---|---|---|---|---|
The Artis adjustable tile adaptor is used to adapt round chimney caps to tile chimney liners | |||||||
GALVANIZED | STAINLESS STEEL | ||||||
SIZE: | ITEM # | FITS OUTSIDE TILE DIMENSION | COLLAR SIZES | SIZE: | ITEM # | FITS OUTSIDE TILE DIMENSION | COLLAR SIZES |
8X8 | ATA 88 | 7 1/2″ x 7 1/2″ to 9 1/2″ x 9 1/2″ | 6″, 7″ | 8X8 | SATA 88 | 7 1/2″ x 7 1/2″ to 9 1/2″ x 9 1/2″ | 6″, 7″ |
8X12 | ATA 812 | 7 1/2″ x 11 1/2″ to 9 1/2″ x 13 1/2″ | 6″, 7″, 8″ | 8X12 | SATA 812 | 7 1/2″ x 11 1/2″ to 9 1/2″ x 13 1/2″ | 6″, 7″, 8″ |
12X12 | ATA 1212 | 11 1/2″ x 11 1/2″ to 9 1/2″ x 13 1/2″ | 6″, 7″, 8″, 10″ | 12X12 | SATA 1212 | 11 1/2″ x 11 1/2″ to 9 1/2″ x 13 1/2″ | 6″, 7″, 8″, 10″ |
12X16 | ATA 1216 | 11 1/2″ x 16 1/2″ to 13 1/2″ x 18 1/2″ | 6″, 7″, 8″, 10″ | 12X16 | SATA 1216 | 11 1/2″ x 16 1/2″ to 13 1/2″ x 18 1/2″ | 6″, 7″, 8″, 10″ |
16X16 | ATA 16X16 | 16 1/2″ x 16 1/2″ x 18 1/2″ x 18 1/2″ | 6″, 7″, 8″, 10″, 12″, 14″ | 16X16 | SATA 1616 | 16 1/2″ x 16 1/2″ x 18 1/2″ x 18 1/2″ | 6″, 7″, 8″, 10″, 12″, 14″ |
Please specify collar size |
SHUR-VENT (NATURAL GAS & PROPANE) CONTACT US to request product specs | ![]() | ||||
---|---|---|---|---|---|
The Artis shur vent is ideal for use as a gas appliance vent cap. It was designed to eliminate downdraft, protect the pilot light, an appropriately vent gas appliances | |||||
GALVANIZED | ALUMINUM | ||||
SIZE: | ITEM # | WT. | SIZE: | ITEM # | WT. |
3″ | SV 326 | 1.00 | 3″ | ASV 320 | 0.75 |
4″ | SV 426 | 1.00 | 4″ | ASV 420 | 1.00 |
5″ | SV 526 | 1.50 | 5″ | ASV 520 | 1.00 |
6″ | SV 626 | 2.00 | 6″ | ASV 620 | 1.25 |
7″ | SV 726 | 2.00 | 7″ | ASV 720 | 1.25 |
8″ | SV 826 | 3.00 | 8″ | ASV 820 | 1.50 |
9″ | SV 926 | 4.00 | 9″ | ASV 925 | 1.50 |
10″ | SV 1026 | 5.00 | 10″ | ASV 1025 | 2.00 |
12″ | SV 1226 | 5.00 | 12″ | ASV 1225 | 2.50 |
½ sizes are available and priced to next largest full size |